Section 3
3 - 1
Service Schedules
EVERY 10 OPERATING HOURS OR DAILY
whichever occurs first, for the first 50 Operating Hours
only
Check (engine stopped)
1 Tightness of wheel bolts
EVERY 10 OPERATING HOURS OR DAILY
whichever occurs first
Clean
1 Machine generally, including cab interior
Check (Engine Stopped)
1 Generally for damage, including ROPS/FOPS structure
2 Engine coolant level and condition
3 Fuel system for leaks and contamination
4 Hydraulic fluid level
5 Hydraulic system for leaks
6 Engine oil level and condition
7 Engine generally for leaks
8 Tyre pressures and condition
9 Windscreen washer level (if fitted)
10 Alternator belt tension (100 & 400 series engines only)
11 Fuel filter - drain if necessary (XUD engine only)
12 Seat belt condition and security
13 Slew oil level
Check (Engine Running)
1 Warning lights extinguished
2 Operation of all electrical equipment
3 Exhaust for excessive smoke
4 Operation of all hydraulic services
Grease
1 Quickhitch pivot points
2 Loader arm pivot points
3 Backhoe pivot points
EVERY 50 OPERATING HOURS OR WEEKLY
whichever occurs first
Do the Daily jobs plus:
Check (Engine Stopped)
1 Oil cooler connections
2 Radiator hoses and condition
3 Alternator belt tension
4 Fuel filter - drain if necessary
Clean
1 Quickhitch square locking peg housings.
EVERY 100 OPERATING HOURS OR 2 WEEKLY
whichever occurs first
Do the Daily and 50 hour jobs plus:
Clean
1 Battery terminals
2 Air filter outer element when operating in dusty
conditions
Check (Engine Stopped)
1 Condition of ram piston rods
2 Hoses and pipework for chafing and damage
3 Air cleaner hose security
4 Wiring for chafing
Oil
1 All linkage points
2 Door hinges (cabbed version)
Section 3 Routine Maintenance
9803/8550
3 - 1
Issue 4*
*
*
To Next Page
Loading...
Need help?
General
