1 - 1
Section 3 Routine Maintenance
9803/8550
Section 3
1 - 1
Issue 7*
ITEM CAPACITY FLUID/LUBRICANT SPECIFICATION
Engine Oil
XUD 5 litres JCB High Performance 15W/40 ACEA E2:B2:A2, API CF4/SG
100 series up to m/c no. 807552 8.2 litres
400 series from m/c no. 807553 10.5 litres
Hydraulic System 45 litres JCB High Performance 10W/30 ACEA E2:B2:A2, API CF4/SG
JCB High Performance 15W/40 ACEA E2:B2:A2, API CF4/SG
(top up only)
Cooling System
XUD
Total coolant cap. 11 litres Water/Anti-freeze Inhibited Ethanediol AL - 39 11
Antifreeze 5.5 litres (see Coolant Mixtures)
100 and 400 series
Total coolant cap. 11 litres JCB Four seasons Antifreeze ASTM D3306, BS6580
Antifreeze 5.5 litres & Summer Coolant/water
(see Coolant Mixtures)
Fuel System 45 litres Diesel oil (see Types of Fuel) ASTM D975-66T Nos. 1D, 2D
Grease Points - JCB Special HP Grease Lithium complex NLGI No. 2
consistency including extreme
pressure additives
or JCB Special MPL-EP Grease Lithium based NLGI No. 2
consistency including extreme
pressure additives
Chain Case Fill to level plug Engine Oil
Slew Oil up to m/c no. 807225 Fill to level mark JCB HD90 Gear Oil API GL 5
Slew Oil from m/c no. 807226 Fill to level plug JCB High Performance 10W/30 ACEA E2:B2:A2, API CF4/SG
Fluids, Capacities and Lubricants - except North America
*
To Next Page
Loading...
Need help?
General
