Section 2 - Care and Safety
2-1 2-1
9803/9570-4
Safety Notices
Important Information
T1-015
The Operator Manual
!MWARNING
Study the Operator Manual before starting the
machine. You must understand and follow the
instructions in the Operator Manual. You must
observe all relevant laws and regulations. If you are
unsure about anything, ask your JCB dealer or
employer. Do not guess, you or others could be killed
or seriously injured.
INT-1-1-1_2
Do not operate the machine without an Operator Manual.
Treat the Operator Manual as part of the machine. Keep it
clean and in good condition. Replace the Operator Manual
immediately if it is lost, damaged or becomes unreadable.
Safety Warnings
In this publication and on the machine, there are safety
notices. Each notice starts with a signal word. The signal
word meanings are given below.
!MDANGER
Denotes an extreme hazard exists. If proper
precautions are not taken, it is highly probable that the
operator (or others) could be killed or seriously
injured.
INT-1-2-1
!MWARNING
Denotes a hazard exists. If proper precautions are not
taken, the operator (or others) could be killed or
seriously injured.
INT-1-2-2
!MCAUTION
Denotes a reminder of safety practices. Failure to
follow these safety practices could result in injury to
the operator (or others) and possible damage to the
machine.
INT-1-2-3
This safety alert system identifies
important safety messages in this
manual. When you see this symbol, be
alert, your safety is involved, carefuly
read the message that follows, and inform
other operators.
manualequipospesados@gmail.commanualequipospesados@gmail.com
To Next Page
Loading...
Need help?
General
