Getting Started – 45
Figure 21. Starting SWS Testing and Setup Wizard.
7. It is going to test four sections of the setup: I/O Interface, a Dual Band Switch (if applicable),
optical communication between the receiver and the SOM and initial wavelength calibration.
Click Start button to run the Wizard.
8. Firstly, the Wizard allows the user to choose what kind of interface is to be used. The I/O
Data Acquisition card is a default option. If it is the option you are currently using in your
setup, the Wizard checks the communication between the computer and the receiver. If the
I/O interface does not match the default option the user is prompted to reconfigure the
interface.
9. When the program executes, a dialog box appears (Figure 22). The text boxes at the top
show the default (or current, if changed) configuration.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...