TECHNICAL SPECIFICATIONS
140
REFUELLING
1.3 190HP/1.3 240HP Prescribed fuels and original lubricants
Fuel tank (liters): 36.5
Unleaded petrol with at least 95 R.O.N.
(EN228 specifications)
Engine cooling system (liters): 5.4
Mixture of demineralized water
and 50% PARAFLU
UP
(*)
Cooling system (high voltage) (liters) (**) 7.0
Engine sump (liters): 4.2
SELENIA DIGITEK P.E.
Engine sump and filter (liters): 4.5
Gearbox/differential casing (liters): 6.5 TUTELA TRANSMISSION GI/VI
Hydraulic brake circuit (liters): 1.14 TUTELA TOP EVO
Windscreen and rear window
washer fluid tank (liters):
2.5
Mixture of water and liquid
PETRONAS DURANCE SC 35
(*) When the vehicle is used in particularly harsh climate conditions, we recommend using a 60% mixture of PARAFLU
UP
and 40% demineralized water.
(**) NOTE The cooling tank of the high voltage system cannot be refilled by the driver. If it is necessary to top up the fluids, contact a Jeep Dealership.
To Next Page
Loading...