Jeep COMPASS 4xe - Warning Lights and Messages

KNOWING THE INSTRUMENT PANEL AND MULTIMEDIA
60
"Load" display
The green charging indicator grows
towards the left when the regeneration
phase is in progress or when the heat
engine is charging the high-voltage
battery.
"Power" display
The power is shown on the instrument
panel display by fi lling the engine and/or
battery section (when both are operating
in "HYBRID" mode) from the top right
center, depending on the power source
used. The two indicators will move
independently.
"E-Drive Mode"
The "E-Drive Mode" function informs the
driver of the selected operating mode
("HYBRID" or "ELECTRIC" or "E-SAVE")
by showing dedicated messages on the
display.
TRIP (Trip A/Trip B)
This menu option allows you to view "Trip
computer" information.
The information shown on the instrument
panel display (for "Trip A" and "Trip B") is
as follows:

Distance Traveled (in
"ELECTRIC" mode) (expressed in "km"
or "mi") (Afig.58);

Distance Traveled (in
"HYBRID" mode) (expressed in "km"
or "mi") (Bfig.58);
 Total: Total distance traveled relative
to 'Trip A' (expressed in 'km' or 'mi')
(Cfig.58);

Average Consumption (expressed
in "mpg", or "l/100km" or "km/l")
(Dfig.58);

Travel Time (hours/minutes/
seconds) (Efig.58).
58 J0B6047E
NOTE The 'Average consumption' value
can only be considered reliable during the
operation of the heat engine.