KNOWING YOUR VEHICLE
24
CHARGING SYSTEM FAILURE
Any faults during charging are displayed by the LEDs, either steady or fl ashing, located on the front of the charging status control unit.
Refer to the table below.
GREEN LED RED LED YELLOW LED Description Action/Consequence
1
OFF OFF OFF
Charging cable not
connected to the domestic
charging socket or power
failure in the domestic
power distribution system
–
2
ON OFF OFF
There are no faults in the
domestic power supply
mains, so the charging
cable can be connected to
the charging socket on the
vehicle
–
3
ON ON (Flashing) ON
Overheating at the charging
socket in the domestic
power distribution system
When the normal temperature is reached,
the system will make a new charge
attempt at a lower current level
4
ON OFF ON (Flashing)
Charging to a lower current
level due to overheating
of the charging port of
the domestic electricity
distribution mains (see
point 3)
–
To Next Page
Loading...