KNOWING YOUR VEHICLE
40
CHARGING FROM PUBLIC
CHARGING STATION (AC)
PROCEDURE
43) 44)
The vehicle's high-voltage battery can
be charged by directly connecting the
charging cable of the public charging
stations or using the "Mode3" cable
(optional).
For the characteristics of the "Mode3"
cable, refer to the "Power sources that
can be used - Mode3 cable" chapter.
To charge, proceed as follows:
park the car safely (automatic
transmission lever in position "P" -
Park);
engage the electric park brake;
switch off the engine;
remove the charging cable (optional)
fig.27 from the boot (inside a special
bag), remove the protective cover
(where present) on the two-colour
connector connector (D) and plug it
into the socket of the public charging
station, fig.28;
open the charging flap (A)fig.29
located on the left side by pressing on
the area indicated by the arrow;
remove any dust that may have
accumulated on the charging
connector and charging socket;
remove the protective cover (B)fig.30
of the charging socket and attach it to
the device (C)fig.30;
27 J0B6064E
28 J0B6067E
29 J0B6030E
30 J0B6031E
To Next Page
Loading...