KNOWING YOUR VEHICLE
38
CHARGING PROCEDURE FROM
WALLBOX CHARGING STATION
("SMART" WALLBOX)
WARNING The "smart" wallbox domestic
charging station must be installed by
qualifi ed personnel after checking
the domestic electrical system. For
information on available "smart" wallbox
charging stations, contact a Jeep
Dealership.
The high-voltage battery of the car can
be charged by directly connecting the
charging cable on the wallbox charging
station or using the "Mode3" cable
(optional).
For the characteristics of the "Mode3"
cable, refer to the "Power sources that
can be used - Mode3 cable" chapter.
Charging with "smart" wallbox charging
station, fi g.24 or fi g.25, allows to reach,
from a domestic user, a higher charge
power than the charge achieved using a
domestic socket: the charging time, as a
consequence, is signifi cantly reduced.
Some "smart" wallboxes can be
programmed from the mobile app.
WARNING If programming is present
both on the "small" wallbox and on the
car UConnect
TM
8.4” or mobile app),
the charging system gives priority to
programming of the wallbox (excluding
the programming of the car).
24 J0B6070E
NOTE The "smart" wallbox confi guration
may vary depending on the country where
the car is sold.
NOTE The electrical system of the house
must be checked regularly by qualifi ed
personnel.
25 J0B6081E
The maximum charging current value
is automatically set by the device,
depending on the building's electrical
system.
For the charging procedure, refer to the
"Charging from domestic power supply
(AC) socket procedure".
To Next Page
Loading...