GETTING TO KNOW YOUR VEHICLE 101
6. Lower the windshield gently until it contacts
the tie-down bumpers (if equipped).
Step Six
7. S
ecure the windshield by passing a cinch
s
trap through the tie-down bumper on
either side of the hood and on the
windshield frame. Tighten the strap to
secure the windshield in place.
Adaptive Cruise Control (ACC)/Forward
Collision Warning (FCW) Sensor Protective
Cover — If Equipped
Your vehicle may be equipped with a protective
cover that is to be used whenever the
windshield is folded down in order to protect the
ACC/FCW sensor. To install the cover, follow the
instructions below:
1. Secure the top part of the cover so that it
h
inges to the header.
2. Swing the cover down and push on it so that
i
t covers the opening.
3. Check to make sure the cover is secured
p
roperly.
Protective Cover Installed
NOTE:
Be sure to remove the cover before returning
th
e windshield to the normal position. Store the
cover in the cargo area.
Cleaning Instructions
During windshield down applications, dust/dirt
ca
n accumulate in the cover and block the
camera lens. Use a microfiber cloth to clean the
camera lens, module, and inside cover, being
careful not to damage or scratch the module.
1 — Washer Nozzle
2 — Bumper
3 — Tie-Down
CAUTION!
Do Not Overtighten! Damage to the
windshield could result.
2
To Next Page
Loading...
