EasyManua.ls Logo

Jeep Gladiator 2021 - Trailcam System - if Equipped

Jeep Gladiator 2021
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STARTING AND OPERATING 195
view. Pressing the icon a second time will return
the view to the standard Back Up Camera
display.
When Zoom View is selected while the vehicle is
in
REVERSE, then shifted to DRIVE, the camera
delay view will display the standard Back Up
Camera view. If the vehicle is then returned to
REVERSE gear from DRIVE, the Zoom View
selection will automatically resume.
Shifting to NEUTRAL from any gear will maintain
th
e selected view (Zoom or Standard) as long as
the vehicle is below 8
mph (13 km/h).
If the vehicle is in PARK, Zoom View is available
u
n
til the gear selector is placed in DRIVE or
REVERSE and speeds are at or above 8
mph
(1
3 km/h).
NOTE:
If the vehicle is in DRIVE, NEUTRAL, or
REVERSE, and speed is greater than or equal
to 8 mph (13 km/h), Zoom View is unavail-
able and the icon will appear grey.
While in Zoom View, the guidelines will not be
visible.
TRAILCAM SYSTEM — IF EQUIPPED
Your vehicle may be equipped with a TrailCam
that allows you to you see an on-screen image
of the front view of your vehicle. The image will
be displayed on the touchscreen display along
with a caution note “Check Entire
Surroundings” across the top of the screen.
Front View Camera
NOTE:
The system will stay active while in 4WD Low.
The TrailCam System has programmable
se
ttings that may be selected through the
Uconnect system
Ú page 224.
Manual Activation Of The TrailCam
TrailCam view can be activated via the below
m
e
thods:
Press the “FWD Camera” button on the
controls screen.
Press the “Forward Facing Camera” button
on the apps menu.
Press the “TrailCam” button on the Off Road
Pages.
Press the “Off Road+” button when “Auto
Launch Off Road+” (if equipped) has been
selected under camera settings.
The TrailCam view can also be activated by
pr
essing the icon on the Backup Camera
view. The Backup Camera view can also be
a
c
tivated by pressing the icon on the
TrailCam view.
When the vehicle is shifted out of REVERSE
(w
ith Camera Delay turned off) and TrailCam
view is active, the TrailCam mode is exited and
the previous screen appears again.
When the vehicle is shifted out of REVERSE
(w
ith Camera Delay turned on) and the TrailCam
view is active, the TrailCam image will be
displayed for up to 10 seconds unless the
4

Table of Contents

Related product manuals