108 GETTING TO KNOW YOUR VEHICLE
TONNEAU COVER REMOVAL
To remove the Tonneau Cover, proceed as
follows:
1. Open the tailgate.
2
. Fold the rear panel of the Tonneau Cover
f
orward to reveal the red release straps.
Release Strap Location
3. Pull one of the red release straps to release
t
he Tonneau Cover latch.
NOTE:
Pulling either strap will release the latches to
r
o
ll the Tonneau Cover up; there is no need to
pull both at the same time.
4. Roll the Tonneau Cover forward, starting
w
ith the rear bar and continue to roll toward
the front of the truck bed.
Roll Tonneau Cover Forward
5. Using the stowage straps, secure the
T
onneau Cover in the rolled up position.
Secured Tonneau Cover
6. U
sing a #T50
Torx head driver, remove the
tw o fasteners securing the Tonneau Cover
to the front of the truck bed.
Fastener Locations
7. Utilizing two people, lift the Tonneau Cover
u
p and away from the truck bed.
NOTE:
Be sure the Tonneau Cover has been
c
o
mpletely rolled up, and straps are secure,
before removing.
8. Store in a safe location.
To Next Page
Loading...
