458 TECHNICAL SPECIFICATIONS
ENGINE FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use Mopar® Antifreeze/Coolant 10 Year/
150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)
or
equivalent meeting the requirements of the manufacturer Material
Standard MS.90032.
Engine Oil — 3.6L Engine
We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the
req
uirements of the manufacturer Material Standard MS-6395 such as
Mopar®, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for
correct SAE grade.
Engine Oil Filter
We recommend you use a Mopar® Engine Oil Filter. If a Mopar® Engine
Oil
Filter is unavailable only use filters that meet or exceed SAE/
USCAR-36 Filter Performance Requirements.
Fuel Selection — 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol.
To Next Page
Loading...
