426 SERVICING AND MAINTENANCE
3. Remove the screws from assembly bracket
to access the three bulb sockets.
Assembly Bracket
4. Rotate the appropriate socket a quarter
t
urn counterclockwise, then remove it from
the housing.
5. Pull the bulb straight from the socket to
r
eplace.
Center High Mounted Stop Lamp (CHMSL)
The stop lamp is mounted on the tailgate. If
se
rvice is needed, obtain the LED assembly
from an authorized dealer.
License Plate Lamps
See an authorized dealer to replace LED lamps.
NOTE:
To install a new bulb, reverse the procedure
a
b
ove. When installing the new bulb, care
should be taken to not allow bare skin to come
in contact with the bulb.
TIRES
TIRE SAFETY INFORMATION
Tire safety information will cover aspects of the
following information: Tire Markings, Tire
Identification Numbers, Tire Terminology and
Definitions, Tire Pressures, and Tire Loading.
Tire Markings
Tire Markings
1 — US DOT Safety Standards Code (TIN)
2 — Size Designation
3 — Service Description
4 — Maximum Load
5 — Maximum Pressure
6 — Treadwear, Traction and
Temperature Grades
To Next Page
Loading...
