84 GETTING TO KNOW YOUR VEHICLE
3. Lay the first quarter panel cover assembly
all the way to the right side and the second
quarter panel cover assembly on the left
side. Secure both using the two
hook-and-loop fastener straps on each side.
NOTE:
The quarter panel cover assemblies are marked
“
1
” and “2” on the inside of the panel assembly.
Step Three
4. Close the storage bag and store in a safe
l
ocation.
Step Four
RAISING THE SOFT TOP
Use this QR code to access your
digital experience.
1. From the Sunrider®
P
osition, remove straps if
previously secured.
Step One
1 — Left Quarter Panel Cover Assembly
2 — Right Quarter Panel Cover Assembly
CAUTION!
Failure to follow the next steps could result in
damage to the soft top or vehicle.
To Next Page
Loading...
