Jeep Gladiator 2021 - Page 120

118 GETTING TO KNOW YOUR INSTRUMENT PANEL
Off-Road — If Equipped
Push and release the up or down arrow
button until the Off-Road menu icon is displayed
in
the instrument cluster display. Push and
release the left or right
arrow button to
scroll through the information submenus.
Drivetrain
 Front Wheel Angle: displays the graphical and
numerical value of calculated average front
wheel angle from the steering wheel orienta-
tion.
 Transfer Case Lock Status: displays “Lock”
graphic only during 4WD High, 4WD High Part
Time or 4WD Low status.
 Axle Lock And Sway Bar Status (if equipped):
displays front and rear or rear only axle locker
graphic, and sway bar connection graphic
with text message (connected or discon-
nected).
Pitch And Roll
Displays the pitch and roll of the vehicle in the
g
r
aphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to
di
splay the pitch and roll, “- -” will display in
place of the numbers, and the graphic will be
grayed out. A message indicating the necessary
speed for the feature to become available will
also display.
Driver Assist — If Equipped
The Driver Assist menu displays the status of
the ACC system.
Push and release the up
or down arrow
button until the Driver Assist menu is displayed
in
the instrument cluster display.
Adaptive Cruise Control (ACC) Feature — If
Eq
uipped
The instrument cluster display displays the
cu
rrent ACC system settings. The information
displayed depends on ACC system status.
Push the ACC ON/OFF button (located on the
st
eering wheel) until one of the following
displays in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
“A
daptive Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
se tting has not been selected, the display will
read “Adaptive Cruise Control Ready.”
Push the SET + or the SET - button (located on
th
e steering wheel), and the following will
display in the instrument cluster display.
ACC SET
When ACC is set, the set speed will display in
th
e instrument cluster.
The ACC screen may display once again if any
AC
C activity occurs, which may include any of
the following:
 System Cancel
 Driver Override
 System Off
 ACC Proximity Warning
 ACC Unavailable Warning
NOTE:
The instrument cluster display will return to the
la
st display selected after five seconds of no
ACC display activity
Ú page 177.