186 STARTING AND OPERATING
Turns And Bends
When driving on a curve with ACC engaged, the
sy
stem may decrease the vehicle speed and
acceleration for stability reasons, with no target
vehicle detected. Once the vehicle is out of the
curve the system will resume your original set
speed. This is a part of normal ACC system
functionality.
NOTE:
On tight turns ACC performance may be limited.
Th
e driver must maintain control of the vehicle,
remain alert, and be ready to apply the brakes if
needed.
Turn Or Bend Example
Using ACC On Hills
When driving on hills, ACC may not detect a
v
e
hicle in your lane. Depending on the speed,
vehicle load, traffic conditions, and the
steepness of the hills, ACC performance may be
limited.
NOTE:
The driver must maintain control of the vehicle,
r
e
main alert, and be ready to apply the brakes if
needed.
ACC Hill Example
Lane Changing
ACC may not detect a vehicle until it is
co
mpletely in the lane in which you are
traveling. In the illustration shown, ACC has not
yet detected the vehicle changing lanes and it
may not detect the vehicle until it's too late for
the ACC system to take action. There may not be
sufficient distance to the lane-changing vehicle.
Always be attentive and ready to apply the
brakes if necessary.
Lane Changing Example
To Next Page
Loading...
