204 STARTING AND OPERATING
Without Weight-Distributing Hitch (Incorrect)
With Weight-Distributing Hitch (Correct)
Improper Adjustment Of Weight-Distributing Hitch
(I
ncorrect)
Recommended Distribution Hitch Adjustment
1. Position the truck to be ready to connect to
t
he trailer (do not connect the trailer).
2. Measure the height of the top of the front
f
ender to ground, this is height H1.
Measuring Height (H)
3. Attach the trailer to the vehicle without the
w
eight distribution bars connected.
4. Measure the height of the top of the front
f
ender to ground, this is height H2.
5. Install and adjust the tension in the weight
d
istributing bars per the manufacturer’s
recommendations so that the height of the
front fender is approximately H1 (H2=H1).
6. The truck can now be driven.
WARNING!
An improperly adjusted Weight Distributing
Hitch system may reduce handling,
stability, braking performance, and could
result in a collision.
Weight Distributing Systems may not be
compatible with Surge Brake Couplers.
Consult with your hitch and trailer manufac-
turer or a reputable Recreational Vehicle
de
aler for additional information.
To Next Page
Loading...
