GETTING TO KNOW YOUR VEHICLE 55
Recirculation Button
Press and release this button on the
touchscreen, or push the button on
th
e faceplate to change the system
between recirculation mode and
outside air mode. The Recirculation indicator
and the A/C indicator illuminate when the
Recirculation button is pressed. Recirculation
can be used when outside conditions such as
smoke, odors, dust, or high humidity are
present. Recirculation can be used in all modes.
Recirculation may be unavailable (button on the
touchscreen greyed out) if conditions exist that
could create fogging on the inside of the
windshield. The A/C can be deselected
manually without disturbing the mode control
selection. Continuous use of the Recirculation
mode may make the inside air stuffy and
window fogging may occur. Extended use of this
mode is not recommended.
AUTO Button
Press and release this button on the
touchscreen, or push the button on
th
e faceplate, to change the current
setting. The AUTO indicator
illuminates when AUTO is on. This feature
automatically controls the interior cabin
temperature by adjusting distribution and
blower speed. AUTO Mode is highly
recommended for efficiency. Toggling this
function will cause the system to switch
between manual mode and automatic mode
Ú page 59.
Front Defrost
Turn the Mode control knob to Front
Defrost to change the current airflow
se
tting to Defrost mode. The Front
Defrost indicator illuminates when
Front Defrost is on. Air comes from the
windshield and side window demist outlets.
When the defrost button is selected, the blower
level may increase. Use Defrost mode with
maximum temperature settings for best
windshield and side window defrosting and
defogging. When toggling the front defrost
mode button, the Climate Control system will
return to the previous setting.
Rear Defrost Button
Press and release the Rear Defrost
Control button on the touchscreen, or
pu
sh and release the button on the
faceplate to turn on the rear window
defroster and the heated outside mirrors (if
equipped). The Rear Defrost indicator
illuminates when the rear window defroster is
on. The rear window defroster automatically
turns off after 10
minutes.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
2
To Next Page
Loading...
