GETTING TO KNOW YOUR VEHICLE 81
Lowering The Soft Top Into The Sunrider®
Position:
Use this QR code to access your
digital experience.
1. Fo
ld both sun visors
f
orward against the
windshield.
2. Release the header latches
f
rom the crossbar by pulling the handle
downward. Make sure the hook is fully
disengaged from its receiver.
Step Two
3. From both the left and right sides, lift up on
t
he #1 Bow of the soft top to begin the
operation. It is recommended to utilize two
people for this procedure.
Step Three
4. Move to the side of the vehicle and use the
s
ide link to fold the soft top rearward.
Step Four
5. S
ecure the top in this position by using the
t
wo hook-and-loop fasteners provided in the
center console.
Step Five
NOTE:
The vehicle can be driven in the Sunrider® Posi-
tion with the rear window and quarter panel
c
o
ver assemblies fully installed or completely
removed.
CAUTION!
Quarter panel cover assemblies and rear win-
dow must be either all in or all out.
2
To Next Page
Loading...
