88 GETTING TO KNOW YOUR VEHICLE
2. Using the provided #T50 Torx head driver
an d ratchet, unscrew the two Torx head
fasteners on the inside of each top
mechanism.
Step Two
3. Utilizing two people, lift the soft top up and
a way from the vehicle, careful to avoid the
vehicle’s sport bar and trim. Store the soft
top in a safe, clean, and dry location.
4. Remove the door frames. The rear door
f
rames must be removed before the front
door frames
Ú page 97.
5. Using the provided #T50
Torx head driver
an d ratchet, unscrew the six Torx head
fasteners on both rear corners and the back
of the cab, then remove the belt rail.
NOTE:
Folding down the rear seats is recommended to
pr
ovide easier access to the fasteners.
Step Five
1 — Rear Fasteners
2 — Corner Fasteners
To Next Page
Loading...
