GETTING TO KNOW YOUR VEHICLE 93
NOTE:
The left side panel must be removed before
re
moving the right side panel.
1. Fold down the sun visor against the
w
indshield.
2. Turn the three L-shaped locks on the left
s
ide panel (one at the front, the rear, and
outside), unlocking them from the roof.
Step Two
3. Unlatch the left side header panel latch
l
ocated at the top of the windshield.
Step Three
4. Remove the left side panel.
5
. Repeat the steps above to remove the right
s
ide panel.
Hard Top Panel(s) Storage Bag — If
Equipped
The Freedom Top panels storage bag allows you
to store your hard top panels. The storage bag
contains two compartments.
Lay the bag for the panels down so the loops
an
d hooks are facing upward. Unzip the bag and
fold back the outer flap.
NOTE:
Ensure the front panel latch is closed prior to
inserting the panel into the panels bag.
There is a pouch located on the front of the
bag to store the provided hard top edge
protectors that are used when the hard top is
not installed on the vehicle.
1. Insert the left side hard top panel into the
b
ag with the latches facing upward.
2. Unfold the black panel divider (ensure the
d
ivider is laying flat).
3. Insert the right side Freedom Top panel into
t
he bag with the latches facing downward.
NOTE:
Ensure the front panel latch is closed prior to
i
n
serting the panel into the bag.
1 — Rear Panel Lock
2 — Front Panel Lock
3 — Outside Panel Lock
1 — Header Panel Latched
2 — Header Panel Unlatched
2
To Next Page
Loading...
