Jensen VX7021 - Page 55

 Touch the “Pair” icon on the unit’s Bluetooth® user interface screen.
 A prompt to pair or bond should appear on your mobile phone. Accept the
request and initiate the process.
/05&4PNFNPCJMFQIPOFTSFRVJSFBiQBTTLFZwPSQBJSJOHDPEFUP
DPOOFDU*GZPVSQIPOFSFRVJSFTBQBTTLFZPSQBJSJOHDPEFZPVXJMMOFFE
UPFOUFSUIJTOVNCFS5IFEFGBVMUQBJSJOHDPEFGPSNBOZNPCJMFQIPOFT
JTiw5IFEFGBVMUDPEFGPSUIF79JTiw
 A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is “0000”.
 At this point a prompt stating pairing successful should appear. Another
prompt should appear asking connect to the unit, Yes or NP. Touch Yes. The
mobile phone and the unit should connect. The mobile phone should display
a message similar to “Device Connected” and the mobile phone and the unit
are now connected. 79 will appear on the mobile phone list ofdevices.
.BOBHJOH*ODPNJOH$BMMT
When connected to a Bluetooth® mobile phone, the unit will mute audio output,
pause CD play, and change to the Bluetooth® screen below when a call is received.
The incoming phone number or assigned name for that number will appear on
the screen. An audible tone will sound from the unit and a graphic display will
appear on the front panel.
#MVFUPPUI4DSFFO
1. icon: Touch to answer an incoming call.
2. icon:Touch to end an incoming call.