1. INTRODUCTION
GENERAL SAFETY INSTRUCTIONS
The following is a brief description of the measures, which should be a matter of
common knowledge to the operator.
1. Always disengage the PTO drive shaft, activate the parking brake and stop the
tractor engine before you
- lubricate the machine,
- clean the machine,
- disassemble any part of the machine,
- adjust the machine.
2. Always block the wheels before working under the machine.
3. Never start the tractor until all persons are safely away from the machine.
4. Make sure that all tools have been removed from the machine before starting
the tractor.
5. Make sure that all guards have been mounted correctly.
6. During work never wear loose clothes or have your hair hang down as it may be
pulled in by the moving parts of the machine.
7. Always wear suitable shoes to avoid falling.
8. Do not change the guards or work with the machine when a guard is missing or
defective.
9. Always drive with the statutory lights and safety marking during transport on
public road and at night.
10. Limit the transport speed to maximum 30 km/h if the machine has not been
marked with another maximum speed limit.
11. Do not stand near the machine while it is working.
12. When mounting the PTO drive shaft check that the number and direction of
RPM of the tractor matches those of the machine.
13. Always use hearing protectors if the noise from the machine is annoying or if
you are working with the machine for a considerable period in a tractor cabin,
which has not been silenced sufficiently.
14. Never allow anybody to be on the machine during work or transport.
15. Never use the machine for other purposes than what it has been constructed
for.
16. Do not allow any children to be near when you are working with the machine.
PIGB-138X-02 FC 855 0410
- 10 -
To Next Page
Loading...