1. INTRODUCTION
TECHNICAL DATA
TECHNICAL DATA FC 855
Pick-up width 1.8 m
Power requirement, recommended
minimum
55 KW / 75 HP
Power requirement, maximum 92 KW / 125 HP
Capacity (*) 20-50 t/hour
Blade rotor width 0.72 m
Rpm for rotor 1600 rpm
Number of blades, standard 24
HD blades Standard
Grinding device Grindstone
Reverse grinding Standard
Theoretical cutting length, standard 15 - 30
Reversible shearbar, tungsten-coated Standard
Number of feed rollers 4
Reverse of feed intake Standard, electric
Electrical functions Chute swivelling, deflector and reverse
Hydraulic functions Pick-up lifting
Turning angle for chute 180 degrees
Pick-up, pre-lubricated Standard
Weight with pick-up 1600 kg
Length, max. 4.1 m
Max. width with pick-up 2.5 m
Max. height 3.6 m
Tyre dimension standard 23 - 10,5 x 12
Freewheeling clutch in PTO shaft Standard
Friction clutch in PTO shaft Standard, 1050 Nm
Steel wheels on pick-up Standard
Rubber wheels on pick-up Option
Hitch, adjustable Option
(*) Depends on dry matter content, cutting length, the condition and the amount of the
crop.
We reserve the right to change the construction and specification details without notice.
PIGB-138X-02 FC 855 0410
- 21 -
To Next Page
Loading...