FOREWORD
DEAR CUSTOMER!
We appreciate the confidence you have shown our company by investing in a JF-
STOLL product and congratulate you with your new machine. Of course, it is our
wish that you will experience complete satisfaction with the investment.
This instruction manual contains information about correct and safe use of the
machine.
When buying the machine you will receive information about use, adjustment and
maintenance.
However, this first introduction cannot replace a more thorough knowledge of the
different tasks, functions and correct technical use of the machine.
Therefore you should read this instruction manual very carefully before using
the machine. Pay special attention to the safety instructions.
This instruction manual is made so that the information is mentioned in the order you
will need it, i.e. from the necessary operation conditions to use and maintenance.
Besides this there are illustrations with text.
"Right" and "Left" are defined from a position behind the machine facing the direction
of travel.
All the information, illustrations and technical specifications in this instruction manual
describe the latest version on the time of publication.
JF-Fabriken - J. Freudendahl A/S reserves the right to make changes or
improvements in the design or construction of any part without incurring the
obligations to install such changes on any unit previously delivered.
PIGB-138X-02 FC 855 0410
- 3 -
To Next Page
Loading...