JF-Stoll FC 855 - GUARDS; REPLACEMENT OF BLADES; TYRE PRESSURE

6. MAINTENANCE
GUARDS
Fig. 6-2
Fig. 6-1
Fig. 6-1 When maintaining the machine you often need to open or remove guards. For safety
Fig. 6-2 reasons all guards have been equipped with a lock. The lock ensures that the guard
cannot be opened without using tools. Fig. 6-1 and 6-2 show the two different locking
principles and the corresponding transfers which indicate and illustrate the locks on
the machine.
REPLACEMENT OF BLADES
See description for replacement of blades in the rotor and the subsequent adjustment
in the section REPLACEMENT AND ADJUSTMENT OF BLADES in chapter 4
"ADJUSTMENTS".
TYRE PRESSURE
The below table indicates the recommended tyre pressure.
FC 855
Tyre
dimension
Tyre
pressure
Machine 23x10,5-12/4 Max. 1,4 bar
Support wheels 500-8 Max. 2,4 bar
Rubber wheels for pick-up (Optional
equipment)
3.50-6/4 3,0 bar
CAUTION: Check the tyre pressure regularly and make sure that the wheel-
fixing bolts are tightened correctly.
PIGB-138X-02 FC 855 0410
- 49 -