11. DISPOSAL
11. DISPOSAL
When the machine is worn-out it must be disposed of in a proper way.
Observe the following:
• The machine must not be placed somewhere outside.
• Gearboxes, cylinders, and hoses must be emptied of oil. These oils must be
handed over to a destruction company.
• Disassemble the machine and separate the individual parts, e.g. PTO drive
shafts, tyres, hydraulic components etc.
• Hand over the usable parts to an authorised recycling centre. The large
scrapping parts are handed over to an authorised breaker's yard.
PIGB-138X-02 FC 855 0410
- 59 -
To Next Page
Loading...