1. INTRODUCTION
of the tractor to the amount of grass and thus work with less capacity reserve and, all
other things being equal, have a greater output.
The cutting length of the forage harvester can be adjusted and adapted to the crop in
question. The cutting length is usually reduced when cutting whole crops to ensure
greater damage of the grains. The shorter cutting length will of course require more
power for which reason there will be a lower output when cutting whole crop than
when cutting grass, though it is difficult to compare.
The power requirements are also increased when the blades are worn and the
shearbar adjustment thereby changes. It is necessary to sharpen the blades and
adjust the shearbar during the season.
PIGB-138X-02 FC 855 0410
- 8 -
To Next Page
Loading...