22
6. How to save files
6.1. Folder
The instrument saves all data in the folder “¥LeakDetection¥SavedData” in its internal memory.
6.2. Saved file list
There are 4 types of file to be saved as.
(1) Photo image file ・・・ No sound pressure map
File name: YYYY-MM-DD -hh-mm-ss_photo.jpg
Photo image when data was saved. This file gets created every time you save a data.
“YYYY-MM -DD-hh-mm-ss” represents calendar information when the data was saved.
(same for the files below)
(2) Photo image file with sound pressure map
File name: yyyy-mm-dd-hh-mm-ss _mapdata.jpg
(3) Sound pressure map data file
File name: yyyy-mm-dd-hh-mm-ss _info.csv
This file is saved as CSV formatted text file of the information when the file was saved and sound
pressure map. Sound pressure map is divided into 55×31 areas.
(4) Leak amount data file
File name: yyyy-mm-dd_list.csv
It updates data each time you save a file. It is a list of measurement date (Date), sound pressure
peak (Peak), leak amount (Leak), gain (Gain), distance (Distance), cutoff (Cut off), and threshold
coefficient value (Threshold).
(4) Number of file to save
You can save approximately 3,500 standard sized data as JPEG formatted image file onto the
internal memory. Please note that depending on the image data size, you may not be able to save
3,500 data.
To Next Page
Loading...
Need help?
General