Jntech JNP2K2L-V5 - 4 Installation Procedure; Prepare Installation Tools

23
4 Installation Procedure
4.1 Prepare Installation Tools
The following tools will be needed during inverter installation and wire
connection. You also can choose the right tools according to your own
experience.
Table4-1 Installation tools list
Sketch map
Name
Recommend
specification
Function
Wire crimpers
M2.5~M8
For crimping of cold
terminals.
Electric drill
Ф8
Used for inverter installation
plate fixed hole drilling.
Straight
screwdriver
Ф3
For the installation of
communication connecting
wires.
Cross
screwdriver
Ф5
Used for disassembling
inverter cover.
Inner hexagon
spanner
5#
Used for disassembly and
assembly of inverter cover
panel.