Jntech JNP2K2L-V5 - Description of Buttons

56
until fault or status are cleared.
●
When invert is running normally, “RUN” indicator will be lighted in green.
8.1.2 Description of Buttons
Table8-2 Buttons Function Table
Buttons
Name
Functions
“ON/OFF”
Press once to stop; long time press for
3s to get it started.
“UP”
Page up and increase data. long time
press for Continuous increase.
“DOWN”
Page down and decrease data. long
time press for Continuous reduction.
“ENTER”
To choose and confirm.
+
“DOWN+ENTER”
Return to main interface.
Note！
When inverter is powered on, LCD display background is lighted,
and after 30s normal running, the background light turns off.