73
move the cursor and find the
fault code.
Note！
All query information items can be inquired according to the above operation, and
the fault information in the operation information is only illustrated here.
Please refer to "8.3.1 Description of Inquiry Information Item" for introduction
of inquiry information item.
8.3.4 Parameter Setting
Enter the correct password before entering the parameter setting interface.
After entering the parameter setting menu, you can set the configurable
information items given in "8.3.2 Setting Information Item Description".
Here, the setting operation is demonstrated only with the example of " D-power
Setting ".
1) Position " D-power Setting " : According to the block Diagram of "Figure 8-2
LCD Menu", " D-power Setting " is in the "Parameter Setting" menu;
2) " D-power Setting " is the setting information item. The specific setting steps
are as follows:
To Next Page
Loading...
