14
2 Production Introduction
2.1 Solar Pump Inverter Introduction
Solar pump system is different from traditional AC pumping system, which
takes use of solar cells to convert solar energy into electricity.
It consists of 4 parts: PV modules, Solar Pump Inverter, AC pump and water
storage device. Solar Pump Inverter converts DC power produced by PV
module into AC power required by the pump motor. A microprocessor inside
continuously monitor available energy levels and adjust pump speed, matching
energy required to energy available. The JNPxL series solar pump inverters
increase AC input supplement function, on basis of traditional Solar pump
inverter. In the case of insufficient PV energy, the AC input energy can be
supplemented according to the demand to ensure the normal water supply of
users at night or cloudy days. This enables the system to operate under varying
solar isolation levels, and provide water throughout the day and through
different seasons. The solar Pump Inverter utilize a high efficiency MPPT
algorithm to maximize power harvested from PV module.
Warning！
Inverter can’t be connected with the PV array, which positive or negative is
grounded!
To Next Page
Loading...
