5407934-UIM-C-1119
Johnson Controls Ducted Systems 65
FORCED OPERATION
The Forced Operation screen options and functions available depend on
the system configuration. This screen allows the thermostat to command
indoor and outdoor operation which may include compressor cooling
operation, compressor heating operation (if heat pump is present), Fur-
nace/Gas heating operation and Electric/Air Handler heating operation
for a designated time period.
FIGURE 35: Airflow Configuration - Variable Capacity
NOTICE
When entering forced operation, normal operation of the system will
be discontinued. This means that the controller will not control equip-
ment to maintain a set point, schedule, mode of operation, etc. Forced
operation is a deviation from normal operation and the system will only
run when commanded through the forced operation menus. Normal
operation is restored when forced operation is exited.
A1379-001
VARIABLE CAPACITY
HEAT AIRFLOW ADJUST 0%
COOL AIRFLOW ADJUST +10%
CLIMATE -5%
AIRFLOW CONFIGURATION
BACK
To Next Page
Loading...
Need help?
General
