Accessories ordering information
Table 26: SNE accessories ordering information
Product code number or vendor
model number
Description
AS-XFR100-1 Power transformer with enclosure, class 2, 24 VAC, 92 VA maximum output.
AS-XFR010-1 Power transformer, no enclosure, class 2, 24 VAC, 92 VA maximum output.
ACC-PWRKIT-1A24 Power supply, desktop kit, 90-264 VAC to 24 VDC, 65 W, includes AC cord with
North American Plug.
ACC-PWRKIT-1E24 Power supply, desktop kit, 90-264 VAC to 24 VDC, 65 W, includes AC cord with
European Plug.
ACC-USBLON-0
11
USB to LonWorks adapter. Includes DIN Rail mounting bracket. Tested and
qualified for use on the SNE.
ACC-USBRS232-0
1
USB to RS232 adapter. Tested and qualified for use with the SNE.
ACC-USBETH-0
1
USB-to-Ethernet adapter. Tested and qualified for use with SNC and SNE
Supervisory Network Engines.
Note: The USB to Ethernet adapter may only be used for 3rd party IP inte-
grations.
ACC-USBMBUS-0
1
USB-to-MBus level converter for up to 100 unit loads. Tested and qualified for
use with SNC and SNE Supervisory Network Engines.
ACC-USBRS485-0
1
USB-to-RS485 Adapter. Tested and qualified for use with SNC and SNE
Supervisory Network Engines.
WRZ Series Wireless Room Sensors Refer to the WRZ Series Wireless Room Sensors Product Bulletin (LIT-12011653) for
specific sensor model descriptions.
WRZ-7860-0 Receiver for One-to-One Wireless Room Sensing Systems - functions with QRZ
Series Sensors room sensors
WRZ-SST-120 Refer to the WRZ-SST-120 Wireless Sensing System Tool Installation Instructions
(LIT-24-10563-55) for usage instructions.
ZFR-HPSST-0 Wireless System Survey Tool. For use with the higher power WRG1830/ZFR183x
System and lower power WRZ Sensors (10 mW). Refer to the High Power Wireless
Sensing System Tool Installation Instructions (LIT-24-11461-00012) for usage
instructions.
WRG1830/ZFR183x Pro Series
Wireless Field Bus System
For more information on products needed for wireless field bus installations and
for a list of available products, refer to the WRG1830/ZFR183x Pro Series Wireless
Field Bus System Catalog Page (LIT-1901153).
ZFR-USBHA-0 ZFR USB Dongle provides a wireless connection through CCT to allow wireless
commissioning of the wirelessly enabled CGM and CVM controllers. It also allows
use of the ZFR Checkout Tool (ZCT) in CCT.
Note: The ZFR-USBHA-0 is not compatible with the WRG1830/ZFR183x Pro
Series.
Note: The ZFR-USBHA-0 replaces the IA OEM DAUBI_2400 ZFR USB don-
gle. For additional information about the ZFR-USBHA-0 ZFR dongle, refer to
the ZCT Checkout Tool Help LIT-12012292 or the WNC1800_ZFR182x Pro Series
Wireless Field Bus System Technical Bulletin (LIT-12012356).
1 Non-qualified adapters do not function in USB ports of the SNE.
Table 27: M-Bus accessories ordering information
Product Code Number Description
SIS-MBUSSCLL-0E M-Bus level converter for up to 100 unit loads; 24 VAC/VDC (RS-232 connection);
requires ACC-USBRS232-0 adapter
SIS-MBUSNCLL-1E M-Bus level converter for up to 100 unit loads; 24 VAC/VDC (IP connection)
SIS-MBUSRPLL-0E M-Bus repeater for up to 100 unit loads, 24V AC/DC
SNE Installation Guide 23
To Next Page
Loading...
