Table 6: Touchscreen icons
Icon Icon name Description
Heating Hold Indicates that heating hold mode is enabled. To disable Hold mode,
press the button.
Cooling Setpoint Displays the current cooling setpoint. Indicates that Hold mode is
disabled. To enable Hold mode, press the button.
Heating Setpoint Displays the current heating setpoint. Indicates that Hold mode is
disabled. To enable Hold mode, press the button.
Setpoint Temperature Displays the current setpoint temperature. Indicates that the Show
Hold button is set to No.
Heating Mode Indicates that heating mode is selected.
Cooling Mode Indicates that cooling mode is selected.
Auto Mode Indicates that Auto mode is selected.
On
Auto
Quiet
Fan Overrides for Single-
speed Fans
Adjusts the fan override between On, Auto, and Quiet for single-speed
fans.
Unoccupied
Occupied
Temporarily
Occupied
Standby
Override -
Occupied
Override -
Unnoccupied
Occupancy Status Adjusts the occupancy between Unoccupied, Occupied, Temporarily
Occupied, Standby, Occupancy Override, Unoccupancy Override.
Back Moves the display to the previous screen.
Forward Moves the display to the next screen.
TEC3000 Series Networked and Wireless Single- or Two-Stage Economizer Thermostat Controllers Installation Guide14
To Next Page
Loading...
