128
POWERHEAD
REMOVAL
REMOVAL
Remove the two screws and nuts from the top
rear of lower engine cover.
Remove the water indicator hose and remove the
screw from the lower rear of the lower engine
cover.
Remove the two screws from the top front of the
lower engine cover.
Remove the screw and nut from the lower front of
the lower engine cover.
Remove the lower covers.
Remove electrical components. Refer to ELEC-
TRICAL section.
Remove the fuel components. Refer to FUEL
SYSTEM section.
Remove the ignition components. Refer to IGNI-
TION section.
Remove the shift lever and linkage. Refer to
SHIFT LINKAGE on p. 124.
If equipped with a steering handle, remove the
handle and components. Refer to MIDSECTION
section.
WARNING
To prevent accidental starting of engine
while servicing, twist and remove all spark
plug leads. On electric start models, dis-
connect battery cables at the battery. Dis-
connect battery positive (+) cable first and
then the battery negative (–) cable.
32816
32819
32817
32818
To Next Page
Loading...
Need help?
General
