4-18
Main menu
Explanation
Default
Sub-menu1
Sub-menu2
Sub-menu3
CONTACT OUTPUT
Selectting a contact output port.
【 200pluse/NM, 400pluse/NM, OFF 】
OFF
DIAGNOSIS
Outputting alarm histry and setting vlaue.
・Data is output from a data IN/OUT1 port.
-
8> MAINTENANCE
INPUT DATA
Data that is received from the serial port can be
displayed on a screen.
・Display format(ASCII/BINARY) can be selected.
-
DIAGNOSIS
DISPLAY DIAG
Self-diagnosis of ROM, RAM, and serial port can be
performed
-
MONITOR TEST
Self-diagnosis of LCD can be performed.
-
BUZZER TEST
Self-diagnosis of buzzer sound can be performed.
-
ERROR LOG
Up to 40 past alarms can be stored and when the
number of alarms exceeds 40, alarms are deleted
from the oldest one.
ALARM
The current alarm is displayed.
-
ERROR LOG The past alarm is displayed. -
SOFT VERSION
DISPLAY VER -
APP VER
The software version of the display unit can be
displayed.
-
SERIAL
NUMBER
The serial number of the display unit can be displayed.
-
BARCODE
The bar code number of the display unit can be
displayed.
-
9> MASTER REST
GRAPH RESET
Reset of water temperature and water depth. -
DISPLAY RESET
Reset of entire display unit.
-
10> DEMO MODE
DEMO TYPE
Select the action of demonstration.
【 Static, Strate, Right, Left 】
-
DATE
Start day of demonstration. -
TIME
Start time of demonstration. -
LATITUDE
Start position (Lat) of demonstration. -
LONGITUDE
Start position (Lon) of demonstration. -
To Next Page
Loading...
