6-1
Section 6 Installation
Consult with JRC or our agents to install. Installation by unauthorized personnel
may result in a malfunction.
Do not install this unit at the place exposed to direct sunlight for a long time or hit
by hot wind or where the temperature rises above 55℃. Otherwise it may cause a
fire or a breakdown.
Do not put the equipment on the unstable place such as wobbly base or tilted
area. Otherwise it may cause the equipment to drop or fall, resulting in an injury or
a failure.
Do not put the equipment in the cabinet or cover it with the nonporous thing such
as cardboard. Otherwise it may cause the equipment to be filled with heat,
resulting in a fire or a failure.
When this unit is suddenly moved from a cool place to a warm place, drew
condensation water may form on the inside windows, and the liquid crystal part
can become visually difficult. In this case, leave the unit for a while until becoming
dry condition. Then operate the unit.
CAUTION
To Next Page
Loading...
