JRC JMA-922B-9XA - SECTION 3 BASIC OPERATION

5-24
3) Set an alarm from the inside of "Alarm Name" of each terminal name.
The alarm to have set to each terminal name becomes output from the terminal of the terminal board.
・Setting the Internal Port(CQD-2121)
1) Set an alarm from the inside of "Alarm Name" of each terminal name.
The alarm to have set to each terminal name becomes output from the terminal of the terminal board.
(1) Left-click the [ ] button
(2) Select equipment form the list
(1) Left-click the [ ] button
(2) Select equipment from the list