JRC JMR-7225-6X - Page 100

Section 6 Target Tracking and AIS 6-46
Canceling AIS target information display
1 Set the cursor mode to the AUTO mode.
2 Move the cursor to and click on the activated AIS target whose AIS target information
is to be cancelled.
The information display of the selected AIS target is canceled.
Details on AIS target information
Two AIS target information display modes are available, a standard mode, and an extended mode, and
the items that are displayed vary depending on the mode.
Use the AIS Standard/Extended selector button for switching between the standard mode and the
extended mode.
For verifying more detailed information of the AIS target, refer to "2.3.1.4 AID Detail INFO".
The display contents vary depending on the types of AIS targets.
When the AIS Standard/Extended
selector button is clicked to change
display to , extended mode is
entered.
When the button is clicked to change
display to , standard mode is
entered.