Section 12 Automatic Sailing (Option) 12-12
12.4 Starting Automatic Sailing
If your ship has reached a veering circle during the automatic navigation,
make sure that the safety check and veering operation are made by the
ship operator himself.
If veering operation is not made, regression bearing will be maintained
without veering. This may cause an accident.
Input the ship’s parameter accurately according to the specification of the
ship.
Otherwise, accidents may result.
Do not neglect confirmation of the position and the bearing of own ship
during sailing regardless of whether automatic sailing is set to ON or
OFF.
Otherwise, an accident may occur.
1 Click on the [Start] button of Procedure tab 2.
[Start] button
To Next Page
Loading...
