JRC JMR-7225-6X - Tracked Target Information Display

6-27 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
9 Turn the VRM dial to set [End Distance].
10 Press the EBL dial.
6.5.3 Tracked target information display
Note
When a target or own ship changes its course, or when a new target is acquired, its vector may not
reach a given level of accuracy until 3 minutes or more has passed after such course change or
target acquisition.
Even if 3 minutes or more has passed, the vector may include an error depending upon the
tracking conditions.
1 Set the cursor mode to the AUTO mode.
2 Click on the target of tracking whose numerical value is to be displayed.
Numeric data for the specified target is displayed in the information monitoring window.
Eng angle
End distance