8-55 Section 8 Functions of the ECDIS (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
8.13.1 Turning On/Off overlay display
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Select [View] - [Options] - [RADAR] on the menu.
3 Select the [RADAR Overlay] check box.
Radar overlay display is set to On.
4 Select a radar system to be used from the pull-down menu.
Memo
• When multiple radar systems are available, click the [RADAR Overlay] combo box and then
select the radar image to be used from the pull-down menu that appears. (Radar images can
be selected from the maximum of 8 systems, [RADAR1] to [RADAR8].)
• Even if the connection between this equipment and the radar system is not set or the
connection setting is cancelled, reconnection is set automatically. As a result, the overlay
display of the radar image is continued.
To Next Page
Loading...
