Section 13 Operating a Chart (option) 13-22
13.10 Displaying an ENC Update Status
Report
This function displays a latest report of S-57 and C-MAP within the system.
This function also displays a latest report of S-57 and C-MAP relating to the specified route.
1 Click on the [Menu] button on the left tool bar.
2 Click on [Chart］－［ENC update status report］ on the menu.
The [ENC update status report] dialog is displayed.
【S-57】
【C-MAP】
Set the [Route filter] check box to ON and select a route on the [Select Route] combo box.
The update report relating to the selected route (Route filtered ENC update status report） is displayed ,
the list items that are displayed by each tab increase, and the contents change.
In C - MAP, selecting database in the [C - MAP Database] combo box, you can display only the
information of the selected database.
To Next Page
Loading...
