Section 6 Target Tracking and AIS 6-70
6.11.2 Switching message display
To display transmitted messages:
Click on the [TX Tray] (Transmitted Tray) button.
To display saved messages:
Click on the [Saved Tray] button.
To display received messages:
Click on the [RX Tray] (Received Tray) button.
Unread messages are displayed in boldface.
To filter messages by specifying the transmission method:
To display only messages sent/received by specifying an MMSI code:
Click on the [Addressed] (address specification)
button.
To display only messages distributed through broadcasting: Click on the [Broadcast] button.
When messages are not filtered by the transmission method: Click on the [All] (display all) button.
To filter messages by specifying category:
To display only safety related messages: Click on the [Safety] (safety related) button.
To display only routine messages: Click on the [Routine] button.
When messages are not filtered by category: Click on the [All] (display all) button.
To Next Page
Loading...
