Section 8 Functions of the ECDIS (Option) 8-6
8.2.3 Entering an ARCS PIN Number (ARCS Only)
When ARCS charts have been imported, the ARCS PIN code input dialog box appears when the
ECDIS is started.
Since ARCS is restricted by the ARCS PIN number, ARCS is not displayed unless the correct ARCS
PIN number is input.
To use ARCS charts, be sure to perform the following operation.
1 Input a PIN number in [ARCS PIN] of the [ARCS PIN] dialog box
2 Click on the [OK] button.
When the [X] button is clicked on, ECDIS starts without displaying ARCS.
Note
ARCS is not displayed when the contract has expired even if the correct ARCS PIN number is
input.
Memo
It is necessary to enter an ARCS PIN code only when the ECDIS screen will be displayed for the
first time.
To Next Page
Loading...
