Section 8 Functions of the ECDIS (Option) 8-62
8.15.2 Entering the ship's heading/own ship's speed
manually
When the device (example: LOG) that is connected to this equipment fails to function, the target
tracking device and true motion display can be used by entering the ship's heading/own ship's speed
manually by using the following procedure.
1 Select [Menu] from the corresponding combo box.
The [Sensor Selection/Status] dialog box appears.
2 To enter the ship's heading manually, select [Manual] from the [Heading] combo box.
To enter the ship's own speed manually, select [Manual] from the [STW] combo box.
3 Click on the input combo box.
4 Enter numeric values through the software keyboard.
To Next Page
Loading...
