Section 14 Creating a User Chart/ Updating a Chart Manually 14-32
14.4.2 Selecting an object type
1 Click on the [Type] button on the drawing toolbar.
An icon list is displayed.
2 Select an object type by clicking on the icon on the icon list.
At manual update, the following icon list is displayed.
The [Mariner's Mark/Line] button is not displayed on the icon list at manual update.
For the details of icons that can be selected from the icon list, refer to "Appendix D.6 Icon Button List
for Manual Update".
Icon list
Category display
Icon list at manual update
To Next Page
Loading...
